编号
设备名称参数
价格
001

 

发动机生产线设备 年产 24 万台 16 万台汽油机 8 万台柴油机

 

Manufacture of engines

CHECK LIST

 

Production lines for manufacture of benzine and diesel

engines with productive capacity 240000 piece/year

(160000 - benzine (B), 80000 – diesel (D))

В приложении направляем перечень технологических комплексов для производства бензиновых и дизельных двигателей производительностью 240 тыс. шт. (160тыс. шт.- бензиновых и 80 тыс –дизельных).

24 万台( 16 万台汽油 和 80 万台柴油)汽油柴油发动机生产线

Перечисленные комплексы в ближайшее время могут быть предложены к поставке. Все оборудование закупалось и поставлялось в начале 90-х годов. Часть оборудования была смонтирована и испытана, затем снова демонтирована и упакована, другая часть оборудования находится в заводской упаковке. Все технологические комплексы разрабатывались под руководством и непосредственным участием фирмы ?Либхерр? (Германия). Имеется подробная техническая документация.

全部设备 90 年代初交货,后拆卸包装,另一部分设备在原包装中。全部设备的采购同德国 LIBHERR 公司合作,有全部技术文件。

 

 

 

Name

Firm manufacturing equipment

Basic specifications parts

 

1

2

3

1

Production transfer line for manufacture block of cylinders.

 

“ Moscow machine tool manufacturing plant named Ordzhonikidze ” – Russia

“Cross”- Germany

“Marposs”- Italy

 

Material – cast iron SCH - 25

Dimenshions, mm: Lenght - 398

Height - 286(B)/294(D)

Width - 330(base)/164(top)

Diameter of cylinder, mm: 82(B)/80(D)

Center distance, mm - 91

2

Production transfer line for manufacture covers of bearing of crankshaft.

 

PTO “VAZ”- Russia

“Libherr”- Germany

“Varinelly”- Italy

Material – cast iron VCH - 50

Dimenshions, mm: Lenght – 108

Height – 60(max)

Width –22,5(max)

Diameter for bearing shell, mm - 60

3

Production transfer line for manufacture crankshaft.

 

PTO “VAZ”- Russia

“Libherr”, “Shenk”, “Beringer”, “AEG”, Alfing”, “Nagel”,“Beda”, “Hegenshaidt”- Germany

“Saimp”, “Marposs” – Italy

 

Material – cast iron VCH – 70

Lenght – 472 mm

Radius counterweight – 72 mm

Radius crank,mm–42,5(B)/44,75(D)

Diameter basic pin of shaft – 55mm

Diameter crankpin of shaft – 50mm

4

Production transfer line for complete manufacture pistones.

 

 

“Cross” - USA

Material – AL30 GOST 2685-75

Diameter piston , mm – 82( B )/80( D )

Height piston , mm – 65

5

Production transfer line for manufacture and assembly head of cylinders.

 

“Stankoagregat” – Russia

“Comau” - Italy

 

Material – AK 12M2

Dimenshions, mm: Lenght – 460

Height 160

Width 170

6

Production transfer line for manufacture covers of camshaft.

 

“Comau” - Italy

Material – AK 12M2

Dimenshions, mm: Lenght – 55

Height 25

Width 22

7

Production transfer line for manufacture camshaft.

PTO “VAZ”, “Gydropress” - Russia

“Libherr”, “Nagel”,

“Emko-Test”, “Shiss-Kopp ”, “Burgsmuller”- Germany

“Marposs” – Italy

 

Material – whitened iron

Maximum radius heel

of cam – 21 mm

Lenght shaft – 465 mm

8

Production transfer line for assembly head of cylinders.

 

“Comau” - Italy

System conveyer for section manual assembly

9

Production transfer line for manufacture toothed crown of flyweel.

 

“BZAL”, “Impuls” – Belorussia

“Komsomolets” – Russia

Material – steel

Outside diameter – 300 mm

Inside diameter – 262 mm

Width – 8 mm

10

Production transfer line for manufacture and assembly flyweel with toothed crown.

 

“Libherr”, “Shenk” – Germany

“Berardy” – Italy

“Avtoprompokrytie” - Ukraina

Material – cast iron SCH - 25

Outside diameter, mm –288(B)/270(D)

 

11

Production transfer line for manufacture connecting rod.

“Alfing” – Germany

“Marposs' – Italy

“MZAL”, “Machine tool manufacturing plant named Kyrov” – Belorussia

“Avtoprompokrytie” - Ukraina

Material – steel HB 235-276

Dimenshions, mm:

Lenght-194,9

Width – 28

Diameter bore for finger – 22,3(B)/28,2(D)

Diameter bore for shell – 53,5

Center distance – 140,65

 

 

12

Section testing engines.

“Frood” – England

“Daifucku” – Japan

- Inspection test engines.

•  Hot test engines and transport.

 

13

Section assembly engines.

“Renault” - France

Conveyer system with manual and automatic positiones for assambly engines.

 

14

Cooling equipment from basement.

“Gydromachine” - Belgium

Removal and supply cooling system. Separate and utilization shavings (aluminum, cast iron, steel).

 

15

Production transfer line for manufacture conducted and conducting rotores oil pump.

“MoZAL” – Russia

“Cadia” – Germany

Material – metal ceramics

ULTRAPAC – LE 0,2…0,4%C

Dimenshions conducted/conducting, mm:

Outside diameter – 85,5/69,5

Inside diameter – 63/45,2

Width – 12,2/12,2

Number tooth – 9/8

 

16

Production line for subassembly water and oil pumpes.

 

“Sortomat” – Hungary

Conveyer system with manual and automatic positiones for assambly without control system.

17

Production transfer line for manufacture exhaust collector.

 

“MZAL” - Belorussia

Material – cast iron SCH 25

 

18

Production line for manufacture piston finger

(turn on lathe).

 

“ Moscow machine tool manufacturing plant named Ordzhonikidze ” – Russia

Material – steel 15X

Dimenshions (B)/(D), mm:

Outside diameter – 22/28,2

Inside diameter – 11,6/13,6

Lenght – 60/68,3

19

Production transfer line for manufacture feed pipe.

“MZAL” - Belorussia

Material – aluminum AK 6M2

OST 48-178-80

lenght– 350 mm , width– 90 mm , height – 21, 5 mm .

 

20

Production-measuring laboratory.

“Comeg” - Germany

Set control and measuring instruments for checking dimenshions basic parts.

 

21

Automatically controlled high-altitude warehouse.

 

Omsk - Russia

Intermediate warehouse for storing prepared and purchased parts.

22

Constitution, controls system,

Instrumentation.

 

“Simens”, “Indacko”, “Wedmuller” - Germany

 

 

 


京ICP备案:06008468

Add:FLAT B 6/F TEDA BIULDING 87 WING LOK STREET SHEUNG WAN HK
Add:中国 北京朝阳区望京园(悠乐会)609楼1102
邮编:100102
电话:86 10 84766589
手机:13901020958 Cao Haitao 曹海涛, 13801088291 Lu Pengcheng 路鹏程
EMAIl: Cao@rushitech.com.cn lu.andree@gmail.com