编号
设备名称参数
价格
001

热模锻KB8544

2500吨

1982年产

 

DAF 满洲里交货
002

热模锻 KB8042 1600吨

1981年产

DAF满洲里交货

 

003

热模锻 KB8546 4000吨 1985 年

照片

 

DAF满洲里交货

 

004

热模锻 K8544 2500吨

1972年

照片

DAF满洲里交货
005

埃尔夫特多工位板金压力机

ERFURT РЕ4-ННТr-1250.2 /5000 х 2200/825 SS/E

1994年
1250吨,多工位自动板金冲压,带3坐标步进梁
上料
加工毛坯长度350--1400(输送方向横着)
宽100-650(顺着)
厚度0.5--4
控制SIMATIC S5
悬挂点4个
立柱间距离5800
6工位
工位中心距750
滑块行程825
闭合高度调节300
最大闭合高度1400
滑块2200X5000
工作台2200X5000
工作台上孔6X1600X520
滑块空运转连续行程8--20
主电机200千瓦
毛坯最大重量10公斤
输送带总长度4500

照片

DAF满洲里交货
006

落地镗铣SKODA250 1982年

Х 12000 мм
Y 4150 мм
Z 2000 мм
W 1600 мм

照片


DAF满洲里交货
007

热模锻KB-8040, new in 1982

- capacity 1000 ton;
- table dimensions 770 x 990 mm;
- slide dimensions 720 x 720 mm;
- slide stroke 250 mm;
- 90 stroke/min;
- slide adjustment 20 mm;
- shut height 580 mm;
- upper ejector capacity 31,5 ton, stroke 40 mm;
- lower ejector capacity 50 ton, stroke 40 mm;
- windows in columns 560 x 560 mm;
- dimensions 4430 x 3500 mm;
- height above a floor level 5145 mm;
- weight 65 tons

照片

DAF满洲里
008

Skoda W 160H/NR year 1983, machine is under power and have biggest
size x-8000mm and y-3150mm.


?koda W 160 H/NR with digital measurement

Year of manufacture: 1983

Technical details:
Spindle size: 160 mm
Axis size:
x - 8050 mm
y - 3150 mm
z - 1600 mm
w - 1250 mm
Desk plate: 2 x 1800x5800 mm
Accessiories:
vertical milling head
rotary table E20 (2500x2200 mm)
Manufacturer: ?koda Plzeň

照片

DAF满洲里
009

热模锻 4000吨 1984年

照片

DAF满洲里
010

落地镗铣 SKODA200H

照片

011

TMP4000吨压力机

TMP-Voronezh, Knuckle Joint / Coining Press, model K8346, new in 1987

- capacity 4000 ton;
- table dimensions 1600 x 1600 mm;
- ram stroke 200 mm;
- 16 stroke/min;
- shut height 720 mm;
- adjustment 20 mm;
- main motor power 132 kW;
- dimensions 5290 x 4680 x 7360 mm;
- weight 236156 kg

照片

012

MAAG 插齿机 7米
MAAG, Gear Shaper, model SH600/735 SE, new in 1982

- max. wheel diameter 7350 mm;
- gear width 1280 mm;
- max. module 40;
- max. module at single tooth tools 50:
- max. internal diameter 2540 mm;
- min internal diameter 400 mm;
- table load 50 tons;
- max number of teeth 1000;
- min number of teeth 12;
- table diameter 2050 mm;
- dimensions 14550 x 9920 x 6210 mm;

照片

013

海德堡 快锻

HATEBUR, Hot Forming Line, model AMP-70, complete in good working condition.

- capacity 1200 t;
- max. outer part diameter 120 mm;
- max. outer dia combo blanks 110 mm;
- max. across the flats 105 mm;
- max. cutoff length 135 mm;
- die center distance 320 mm;
- max. die ejector stroke 130 mm;
- min loading weight 0,36 kg;
- max loading weight 3,5 kg;
- max bar diameter 65 mm;
- productivity 35-70 pcs/min
- net weight 167830 kg

照片

014

16m 立车

TITAN, Vertical Turret Lathe, model SC125/16D, new in 1988

- faceplate diameter 10,000 mm;
- swing 16,000 mm;
- max. workpiece height: 5,500 mm
- max. workpiece weight: 400,000 Kg
- milling spindle rotation: 1.0-630 ot/min.
- spindle diameter: 225 mm
Taper: ISO 50

Machine dimensions
- lenght: 26,154 mm
- width: 17,514 mm
height
- above floor level: 15,300 mm
- below floor level: 4,340 mm
Machine weight: 850,000 kg

Accessories:
Chuck jaws- 4
Head of angle milling for left support(milling) - 1
Universal milling headfor left support(milling) - 1

照片


Milling extender for left support (milling) - 1
Sections of table attachment (upto 16m) - 25

015

龙门铣LINE

3500 x 16000 mm - LINE - PORTAL MILLING MACHINE

LINE, PORTAL MILLING MACHINE, model SL 245, new in 1979

- X - 16000 mm;
- Y - 3500 mm;
- Z - 1000 mm
- floor plates bed dimensions 3200 x 20000 mm;
- max. workpiece weight 6 tons/square meter
- max. distance between column 4500 mm;
- Hydrostatic sustentation on X axis
- Y, Z axis travels on ball screws
- The movement of the portals are made with 2 cinematic pretensioned
chains and electronically synchronized after the concept master - slave
- milling head type is FA 80 DC
- power 100 kW;
- transmitted tourque 1800 mdaN;
- spindle taper ISO 60
- device for automatic blocking of tools
- total weight of the machine 250 tons
- no of portals 1;
- portal components: 2 columns, 2 columns sled
- fixed traverse & mobile traverse, 1 traverse support

照片

 

016

热模锻 6300吨 捷克产
SMERAL, 6300 tons Hot Forging Press

Technical details:

- max. capacity 6300 tons
- stroke 450 mm
- 40 strokes per minute
- max height 1150 mm
- passage 2100 mm
- press body adjustment 15 mm
- press body 1900 x 1700 mm
- table size 1950 x 1900 mm
- max stroke of upper ejector 70 mm
- max stroke of lower ejector 100 mm
- main motors 2 x 200 kW
- overall size (width x depth) 7820 x 6250 mm
- height over floor 7700 mm
- total weight 594.650 kg

照片

017
500吨埃尔福特板金线
ERFURT Press Line, 500 t with FRONT MOVING BOLSTER, in very good condition
The line can be inspected under power, still in production.

4 presses x ERFURT, Double Crank Single Action Mechanical Press, model PKZZ IV 500.1 FS

- capacity 500 ton;
- FRONT MOVING bolster dimensions 2800 x 1800 mm;
- ram stroke 500 mm;
- ram adjustment 500 mm;
- shut height 1100 mm;
- ram dimensions 2800 x 1700 mm;
- main motor power 75 kW;
- cushion capacity in the bolster 100 ton, stroke 200 mm;
- height above floor level 7600 mm;
- weight 140 tons


Add:FLAT B 6/F TEDA BIULDING 87 WING LOK STREET SHEUNG WAN HK
Add:中国 北京朝阳区望京园(悠乐会)609楼1102
邮编:100102
电话:86 10 84766589
手机:13901020958 Cao Haitao 曹海涛, 13801088291 Lu Pengcheng 路鹏程
EMAIl: Cao@rushitech.com.cn lu.andree@gmail.com